CBD vaping pens and CBD vaping tanks making vaping CBD easy and convenient. CBD vaping pens and CBD vaping tanks are perfect alternatives for CBD users who prefer vapes over CBD pills or CBD tinctures.
The product warranty is limited to those of the manufacturer. Please refer to the manufacturer website for details. Warranty does not cover collateral damage. Misuse, abuse, incorrect charging and other inappropriate use (failure to strictly follow the safety warnings and instructions set forth in this FAQ, within the packaging and its instructions, and contained on the manufacturer's website) of this product are not covered under any warranty. Lightfire Group LLC, and Kanger Wholesale USA and their affiliates make and extend no warranties or representations.
Batteries that lose 20 percent of their capacity must be removed from service and disposed of properly. We recommend that you inspect and replace your batteries often. Batteries which have been stored and not placed in service for two(2) months should be discarded and not be charged or used.
In addition to the basic list of best practices, please take note of the following:
Do not charge your battery packs in series. Charge each battery pack individually. Failure to do so may result in incorrect battery recognition and charging functions. Overcharging may occur, and fire may result.
When selecting the cell count or voltage for charging purposes, select the cell count and voltage as it appears on the battery label. As a safety precaution, please confirm the information printed on the battery is correct.
Example: The label on a 2-Cell battery pack in series will read charge as 2-Cell (7.4V) or may cause fire. You must select 2-Cell for charging.
Example: The label on a 3-Cell battery pack in series will read charge as 3-Cell (11.1V) or may cause fire. You must select 3-Cell for charging.
Selecting a cell count other than the one printed on the battery (always confirm label is correct), can cause fire.
You must select the charge rate current that does not exceed the battery's allowed charging current. (Please double check the battery's specification)
If at any time you witness a battery starting to balloon, swell up, smoke or become hot, discontinue the charging process immediately, disconnect the battery, and observe it in a safe place for approximately 15 minutes. This may cause the battery to leak, and the reaction with air may cause the chemicals to ignite, resulting in a fire.
Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Observation should occur in a safe area outside of any building or vehicle and away from any combustible material.
Wire lead shorts can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries may occur due to the conductibility of electric current.
A battery can still ignite even after 10 minutes.
In the event of any damage due to dropping the charger, you must remove the battery for observation and place it in a safe open area away from any combustible material for approximately 15 minutes.
Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor the charging process to assure your batteries are being charged properly. Failure to do so may result in fire.